X-Nico

4 unusual facts about Electrical polarity


AS/NZS 3760

Appliances are inspected for damage, and various measurements are made to the appliances' earth continuity, insulation, polarity, and physical condition.

Balanced audio

Signals are often transmitted over balanced connections using the differential mode, meaning the wires carry signals of opposite polarity to each other (for instance, in an XLR connector, pin 2 carries the signal with normal polarity, and pin 3 carries an inverted version of the same signal).

If a stereophonic or other binaural signal is plugged into such a jack, one channel (usually the right) will be subtracted from the other (usually the left), leaving an unlistenable L − R (left minus right) signal instead of normal monophonic L + R. Reversing the polarity at any other point in a balanced audio system will also result in this effect at some point when it is later mixed-down with its other channel.

H0m gauge

Modern HOm trains run on realistic-looking two-rail track, which is powered by direct current (varying the voltage applied to the rails to change the speed, and polarity to change direction), or by Digital Command Control (sending commands to a decoder in each locomotive).



see also