After joining Thomas Hunt as partner in Cam Mill (previously known as Corrietts Mill) he moved to Cam, Gloucestershire, where he was a cloth manufacturer.
Different line ups included Ray Arnott on drums and vocals; Keith Glass on guitar, vocals and bass guitar; Chris Löfvén on bass guitar; Russell Smith on guitar and vocals; and Chris Stockley on guitar and vocals.
•
Cam-Pact were formed in Melbourne in April 1967 with a line up of Mark Barnes on bass guitar (ex-Moppa Blues, Roadrunners, Delta Set); Keith Glass on vocals and guitar (Rising Sons, Eighteenth Century Quartet); John Pugh on guitar, vocals and autoharp (Roadrunners, Delta Set, Eighteenth Century Quartet); Chris Stockley on guitar (Roadrunners, Delta Set); and Bob Lloyd (aka Bob Tregilgus) on drums.
In the May 2006 local elections, Cam East was held by the Conservative Party, while Cam West was taken by the Liberal Democrats, having previously been a Labour stronghold.
The Piscatory Eclogues are pastorals, the characters of which are represented as fisher boys on the banks of the Cam, and are interesting for the light they cast on the biography of the poet himself (Thyrsil) and his father (Thelgon).
Cam Clarke | Cam Gordon | Cam'ron | Scott Cam | Cam Neely | Cam Ranh Bay | CAM | Cam Newton | Cam Kennedy | Lotus-Ford Twin Cam | Cam Woolley | Cam Ward | Cam Cameron | Cam Archer | Cam | 2003 CAM Open Comunidad Valenciana – Singles | Jean Le Cam | Helen Cam | Donal Cam O'Sullivan Beare | Colin Cam Mackenzie of Kintail | Cam Ranh Air Base | Cam Ranh | Cẩm Phả | Cam-Pact | Cam Johnson | Cam, Gloucestershire | Cam Gigandet | Cam Bonifay | cam | Academy of CAD/CAM Dentistry |
They participated in the Vietnam War from April 1965 to September 1969, operating from Phu Bai, Danang, Cam Lo, Khe Sanh and Camp Carroll.
The 2003 CAM Open Comunidad Valenciana was a tennis tournament played on outdoor clay courts in Valencia in Spain and was part of the International Series of the 2003 ATP Tour.
Academy of CAD/CAM Dentistry-refers to a network of dentists involved in the art and science of CAD/CAM dentistry
Operated by Varney Air Lines (which later became part of United Airlines), the first Eastbound flight over CAM-5 was made successfully using a Laird Swallow biplane piloted by Leon D. Cuddeback.
He has also line produced Kevin Pollak's directorial debut, Vamped Out and served as a producer for VH1's Dance Cam Slam and writer/producer for CBS' Excused.
Meanwhile, Haley (Sarah Hyland) babysits Lily at Mitchell and Cam's while they are out with their friends, and sneaks Dylan (Reid Ewing) in, despite the fact he's not allowed.
BRM had experimented with a four-valve-per-cylinder version of the engine, but this was abandoned in favour of the tried and trusted, oversquare (68.5 x 50.8 mm), fuel-injected, two-valve, quad-cam configuration.
Renishaw plc CAD/CAM systems, from a company that started in industrial metrology with patented probes.
Cam "Buzz" Brainard (born May 21, 1962) is an American voice actor, narrator, and radio personality, originally from Clio, Michigan.
Cam de Leon (born in Modesto, California in 1961) is an American artist who specialises in surreal darkly fantastic imagery.
The United States Air Force operated a large cargo/airlift facility called Cam Ranh Air Base, which was also used as a tactical fighter base.
Owned by Sam Norouzi and his family, it maintains studios located on Christophe Colomb Avenue in Montreal's Ahuntsic district, at the home of the family's production company Mi-Cam Communications.
Under Mr. Wu, Z-11 became the first Chinese helicopter to be completely designed by CAD/CAM.
Though it only uses electric start, not kick start, the 2012 Ducati 1199 uses a compression release, which is automatically activated at low engine speed by a centrifugal flyweight on each exhaust cam.
In addition to CGS, GM also used CADAM, UNIGRAPHICS, CATIA and other off-the-shelf CAD/CAM systems, thus increasing the cost of translating designs from one system to another.
This problem can be fixed by removing the distributor's cap and drying the cap, cam, rotor and the contacts by wiping with tissue paper or a clean rag, by blowing hot air on them, or using a moisture displacement spray e.g. WD-40 or similar.
The series was hosted by Scott Cam and Shelley Craft, with Cam having previously been the resident builder on Backyard Blitz, and featured a design team of Chontelle Samios (interior) and Joel Hurrey (landscape), as well as Richard Reid as the family guide.
Moore got involved with the music industry when he helped form the hip-hop group Children of the Corn, composed of his childhood friends Cam'ron, Mase, Big L, and Bloodshed.
Cam and Mitch sing Elton John and Kiki Dee's song Don't Go Breaking My Heart when Lindsay asks them to sing something for the baby she is going to give them.
The village began in 1905 as a residential township for the Cam and Motor gold mine, operated by Rio Tinto Group, now Rio Zim.
The Fiat Twin Cam engine has been widely used in motorsport and has been the most successful engine in the history of the World Rally Championship.
Final Cut Express' interface was identical to that of Final Cut Pro, but lacks some film-specific features, including Cinema Tools, multi-cam editing, batch capture, and a time code view.
It is a technological showcase that includes solar panel-powered headlights, integrated child seat, baby cam with a monitor mounted on the dash, inflatable rear safety belts, and an interior quieted by ground rubber taken from Nike athletic shoe outsoles.
These engines (aside from the LX9) are the first cam in block engines to implement Variable Valve Timing, and won the 2006 Breakthrough Award from Popular Mechanics for this innovation.
Cam (Eric Stonestreet) meets a few residents of the retirement community and seeing that they have some common interests, he is spending time with them, talking about books and playing Mahjong.
The Evolution Big Twin motor is, for now, the last of the line of single cam, overhead valve motors tracing their lineage back to the ground breaking Knucklehead design penned by founder Bill Harley.
In 1996 the genre was given an overhaul by Travis Draft who introduced the glasses cam with his show Buzzkill.
The engine had the typical features of an inline vertical 6-cylinder: aluminum bed, cast iron cylinders, one inlet and one exhaust valve per cylinder controlled by bars and rockers, with the cam-shaft in the bed, and dual ignition by two Bosch magnetos.
After commissioning into the RAN on 3 March 1942, HMAS Patricia Cam was based in Darwin, where she was mainly used to transport supplies to small communities and military outposts.
Production of the song was handled by Chauncey "Hit-Boy" Hollis, with writing coming from Minaj, Hollis, Ross, and Cam'ron.
In November 2011, the blog of journalist Ismail Khilath Rasheed was shut down by Communications Authority of the Maldives (CAM) on the order of the Ministry of Islamic Affairs, on the grounds that the site contained "anti-Islamic material".
The kiss cam became widely known outside the US and Canada on July 16, 2012, when US President Barack Obama and First Lady Michelle Obama were 'caught' twice by the kiss cam during an international basketball match between Team USA and Brazil at the Verizon Center in Washington D.C. The president kissed his wife on the second occasion.
Modern CAD/CAM braces are used in Europe to treat different types of kyphosis.
There were no Dutch aircraft competing in the North Dutch Flying Club's first international aerobatics competition held in Eelde in the spring of 1936; from a field of German and Dutch pilots, the best placed Dutchman cam second, flying a British Tiger Moth.
It began by providing programmes through The Chartered Institute of Marketing CIM and the Communications, Advertising and Marketing Foundation (CAM).
It was an evolution of the previous Lotus 29 and Lotus 34 Indy designs, but this time with a full monocoque tub chassis; it was powered by the same four-cam Ford V8 fuel injected engine as used in the 34, giving out around 500 bhp.
NEVIS, or New Exhaust Valve & Intake System, is a type of internal combustion engine developed by Cesare Bortone in cooperation with the University of Perugia which utilizes a unique annular piston design on a sinusoidal cam to produce power.
Nobel Biocare is a company that manufactures dental implants and CAD/CAM-based individualized prosthetics and is headquartered in Kloten, Switzerland near to Zurich Airport.
In 2007, CES Innovations award winners included the ATC2K Waterproof Action Cam, the Talking Wireless BBQ/ Oven Thermometer and the WeatherNow II.
The film was intended to be a children's version of The Roller Blade Seven that would showcase Jacksons' "Roller Cam" cinematography and "Zen Film-making" style.
For example, a percentage of profits from Denise Affonço's To The End Of Hell go to the Documenation Centre of Cambodia (DC-Cam), where a scholarship has been set up in the name of Denise Affonço's nine-year-old daughter Jeannie, who starved to death in 1976 under the Khmer Rouge regime.
2003: "Mario Pani" medal, Colegio de Arquitectos de la Ciudad de México (CAM) in the Sociedad de Arquitectos de México (SAM)
Preparing CAM data – Export 2D vector art for a waterjet machine or laser cutter; or generate STEP or STL, for import into third-party CAM software
Known users were, amongst others, Premier Portland Cement in Bulawayo, the Rhodesian Native Timber Concessions at Gwaai, the Cam and Motor Mine at Gatooma, the Selukwe Peak Light Railway of the Selukwe Chrome Mine, the Lupane Forest Estates, the Igusi Saw Mills and the Arcturus Mine east of Salisbury, all these in Rhodesia.
The original members of the group were Cam'ron, Freekey Zekey, and Jim Jones, who all grew up together in Harlem.
After examining the body in the lab, Zack determines that the kneecaps were surgically removed, and Cam and Hodgins decide the victim has been dead for three days.
Ongoing evolution of computerized design and control technologies, such as CAD/CAM, CNC, PLC, and others, has limited the use of jigs in manufacturing, however all the computer run machines need some sort of clamping fixture for production runs.
Main enterprise is located in Paneriai (Vilnius), the capital of Lithuania, where are samples making, CAD (designing), CAM (cutting) departments and nine specialized sewing workshops.
It alternatively bore the name of "CAM", an acronym for "Cybernetic Anthropomorphous Machine", as seen in a segment of the Walter Cronkite-hosted The 21st Century in 1968.